Product Sections

Main Pages

Best Sellers

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.45/6.27

Available again.
find out more

Romford HOn3 axles.

Romford HOn3 axles.

1.98/2.28

Includes two brass fixing nuts
find out more

Lead foil: 150mm x 300mm x 0.10mm

Lead foil: 150mm x 300mm x 0.10mm

18.00/20.70

A roll of lead foil, 300mm x 150mm x 0.10mm.

Ideal for modelling tents, groundsheets, capes, shop-blinds and tarpaulins.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

7.25/8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

3.96/4.55

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.98/2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

4.68/5.38

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

Mashima mounting screws M1.4 x 2mm

Mashima mounting screws M1.4 x 2mm

1.50/1.73

Pack contains 2 x M1.4 x 2mm Mashima mounting screws.
find out more

Bare Heads - European x 8

Bare Heads - European x 8

6.90/7.94

Original set.

Set of eight heads.
find out more

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

4.80/5.52

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY


find out more

N-scale Shinohara Track & Pointwork c70 / Aiguillages

Scalelink |  N-scale Shinohara Track & Pointwork c70 / Aiguillages

Show First 12 Product(s) Show First 12 Product(s)

900mm Code 70 Nickel-silver Flexi-track x 1

900mm Code 70 Nickel-silver Flexi-track x 1

Ref: SDG615

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `BELOW'

Only 2 remaining - 26/11/2020

Price: 6.36/7.31 (Including VAT at 20%)

900mm Code 70 Nickel-silver Flexi-track x 10

900mm Code 70 Nickel-silver Flexi-track x 10

Ref: SDG615B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `BELOW'

Only 4 remaining - 12/09/2022

Price: 63.60/73.14 (Including VAT at 20%)

Code 70 metal rail joiners x 50

Code 70 metal rail joiners x 50

Ref: SDG341

Code 70 rail

Only 6remaining - 26/11/2021

Price: 7.80/8.97 (Including VAT at 20%)

Code 70 insulating rail joiners x 10

Code 70 insulating rail joiners x 10

Ref: SDG342

We now have 4 packs available as at 23/02/2022

Price: 3.00/3.45 (Including VAT at 20%)

c70 No4 Turnout Left-hand

c70 No4 Turnout Left-hand

Ref: SDG601

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 No4 Turnout Right-hand

c70 No4 Turnout Right-hand

Ref: SDG602

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 8 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 No6 Turnout Left Hand

c70 No6 Turnout Left Hand

Ref: SDG603

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 17.7cm / 6.96" : Radius 45cm / 17.7" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 4 remaining - 12/09/2022

Price: 19.20/22.08 (Including VAT at 20%)

c70 No6 Turnout Right Hand

c70 No6 Turnout Right Hand

Ref: SDG604

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 17.7cm / 6.96" : Radius 45cm / 17.7" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

SORRY - ALL GONE 31/10/2022

Price: 19.20/22.08 (Including VAT at 20%)

c70 No 4 Y-point

c70 No 4 Y-point

Ref: SDG607

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 17.7cm / 6.96" : Radius 45cm / 17.7" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 3-way Turnout

c70 3-way Turnout

Ref: SDG608

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 21.5cm / 8.46" : Left frog 9.30 degrees / Right frog 12 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 12/09/2022

Price: 37.20/42.78 (Including VAT at 20%)

c70 Double Crossover

c70 Double Crossover

Ref: SDG612

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 30.8cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 12/09/2022

Price: 57.60/66.24 (Including VAT at 20%)

c70 No 4 Double slip

c70 No 4 Double slip

Ref: SDG613

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 2 remaining - 12/09/2022

Price: 57.60/66.24 (Including VAT at 20%)

c70 No 6 Double Slip

c70 No 6 Double Slip

Ref: SDG614

Code 70 rail - 9mm gauge

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 22.8cm : Radii 51cm / 20" : Frog 9.30 degrees

Only 4 remaining - 12/09/2022

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: 57.60/66.24 (Including VAT at 20%)

c70 No6 Curved Turnout Left Hand

c70 No6 Curved Turnout Left Hand

Ref: SDG626

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length across inside curve 26.8cm : Radii 31.5cm / 28.5cm

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 9 remaining - 12/09/2022

Price: 21.60/24.84 (Including VAT at 20%)

c70 No6 Curved Turnout Right Hand

c70 No6 Curved Turnout Right Hand

Ref: SDG627

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length across inside curve 26.8cm : Radii 31.5cm / 28.5cm

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 9 remaining - 12/09/2022

Price: 21.60/24.84 (Including VAT at 20%)

c70 30 degree crossing

c70 30 degree crossing

Ref: SDG630

Only 5 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 45 degree crossing

c70 45 degree crossing

Ref: SDG631

Only 6 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 60 degree crossing

c70 60 degree crossing

Ref: SDG632

Only 7 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 90 degree crossing

c70 90 degree crossing

Ref: SDG633

Only 4 remaining - 12/09/2022

Price: 18.00/20.70 (Including VAT at 20%)

c70 Triple Yard Turnout Left Hand

c70 Triple Yard Turnout Left Hand

Ref: SDG636

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 36.8cm / 14.5" : Frog 14.14 degrees (No 4)

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 3 renmaining as at 12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: 48.00/55.20 (Including VAT at 20%)

c70 Triple Yard Turnout Right Hand

c70 Triple Yard Turnout Right Hand

Ref: SDG637

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 36.8cm / 14.5" : Frog 14.14 degrees (No 4)

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining - 16/09/2022

Price: 48.00/55.20 (Including VAT at 20%)

Scalelink |  N-scale Shinohara Track & Pointwork c70 / Aiguillages