Product Sections
Main Pages
Best Sellers
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS24 x Threaded crankpins & slotted retainers.
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELSM1.6 x 2mm Steel Grub-screws x 10
24 x Crank pins for driving wheels
Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.SOLD OUTMarkits 1/8th inch axle bush x 12
Etched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,16mm Wagon/Coach/Tender wheels - 12-spoke
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H020mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0THESE WHEELS ARE SOLD SINGLYMarkits DeLuxe Crankpin sets (6)
