Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£2.00/$2.50

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£12.00/$15.00

This pack contains 2 x 16mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Driver

Driver

£10.50/$13.13

For SMEB/VK06. Has Steel helmet, Bandolier and respirator.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

Markits Crankpin Bushes x 10

Markits Crankpin Bushes x 10

£2.88/$3.60

Ideal for bushing connecting rods etc

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£13.00/$16.25

This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

Other Paccessories

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  |  Other Paccessories

Track Pins

Track Pins

Ref: WPY01

Fine 0.5in plated Brass pins for use with flexible tracks. 15 Gramme packs

Price: £2.70/$3.38 (Including VAT at 20%)

Connecting Leads

Connecting Leads

Ref: WPY02

17inch leads with pin and ring terminals (Suit Hornby power clips).

Price: £3.60/$4.50 (Including VAT at 20%)

Grain of Wheat Bulbs x 2 pieces [CLEAR]

Grain of Wheat Bulbs x 2 pieces [CLEAR]

Ref: WPY11

3mm diameter, 0.35 milliamps 10-16 volts AC/DC Clear, Red, Green, Amber.

Price: £1.01/$1.26 (Including VAT at 20%)

Grain of Wheat Bulbs x 2 pieces [RED]

Grain of Wheat Bulbs x 2 pieces [RED]

Ref: WPY12

Red

Price: £1.01/$1.26 (Including VAT at 20%)

Grain of Wheat Bulbs x 2 pieces [GREEN]

Grain of Wheat Bulbs x 2 pieces [GREEN]

Ref: WPY13

Green

Price: £1.01/$1.26 (Including VAT at 20%)

Grain of Wheat Bulbs x 2 pieces [AMBER]

Grain of Wheat Bulbs x 2 pieces [AMBER]

Ref: WPY14

Amber

Price: £1.01/$1.26 (Including VAT at 20%)

Grain of Wheat Bulbs x 2 pieces [BLUE]

Grain of Wheat Bulbs x 2 pieces [BLUE]

Ref: WPY80

Price: £1.01/$1.26 (Including VAT at 20%)

Rigid Track Pins

Rigid Track Pins

Ref: WPY21

10mm Blackened Steel pins for use with proprietary rigid track work.

25gm pack.

Price: £2.70/$3.38 (Including VAT at 20%)

Brass Spacing Washers for 1/8th axles x 10

Brass Spacing Washers for 1/8th axles x 10

Ref: WPY33

6,6mm outside diameter - 3.2mm bore - 0.6mm thickness (24/1000")

Price: £1.50/$1.88 (Including VAT at 20%)

Pick up Braids for slot cars - 40mm long

Pick up Braids for slot cars - 40mm long

Ref: WPY51

Suitable for use with Scalectric and similar systems.

Pack of 6 - 40mm long

Price: £1.56/$1.95 (Including VAT at 20%)

Pick-up braids for slot cars - 20mm long

Pick-up braids for slot cars - 20mm long

Ref: WPY51A

Suitable for Scalextricand other systems

Pack of 12 - 20mm long

Price: £1.56/$1.95 (Including VAT at 20%)

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  |  Other Paccessories