Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0THESE WHEELS ARE SOLD SINGLY find out more
Romford TT axle
£2.00/$2.50
This axle is not intended for use with TT120 For spacing washers see WPY33
For TT 12mm track. Can also be used for H0m 12mm trackONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS, find out more
16mm Bogie wheels - 12-spoke
£4.86/$6.08
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H0 find out more
Romford 16.5mm Axle (1/8" diameter)
£2.00/$2.50
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS, find out more
14mm Bogie wheels - 12-spoke
£4.86/$6.08
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 3 feet 6 inches in 00 121.8cm in H0 find out more
6 x Crank pins for driving wheels
£7.20/$9.00
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.SEE EBAY LISTING = MAX 5 Packs per Customer.RESTRICTED TO 5 PACKS PER CUSTOMER. find out more
14mm Wagon/Coach/Tender wheels - 12-spoke
£4.86/$6.08
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 3 feet 6 inches in 00 121.8cm in H0 find out more
Tenshodo 12 volt CORELESS motor-bogie 26.0mm wheelbase
£60.00/$75.00
This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels
BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs find out more
Hanazono 12 volt motor bogie 26.0mm wheelbase
£46.80/$58.50
Fitted with 12.0mm disc wheels.
BODY size:- Length=35.75mm x Width=14.35mm x Height=15.30mm (above rails) These units must have weight applied to operate successfully.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs find out more
13mm/12-spoke Driving wheel x 1
£3.96/$4.95
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0THESE WHEELS ARE SOLD SINGLY find out more
