Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

7.50/8.63


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

12mm/12-spoke Driving wheel x 1

12mm/12-spoke Driving wheel x 1

3.30/3.80

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 12mm.

THESE WHEELS ARE SOLD SINGLY


find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

3.96/4.55

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

3.00/3.45

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Heads and Arms

Scalelink | WW1 1:32 scale / Grande Guerre | French |  Heads and Arms

Kepi x 8

Kepi x 8

Ref: SMAF01

Price: 6.90/7.94 (Including VAT at 20%)

Cloth covered Kepi x 8

Cloth covered Kepi x 8

Ref: SMAF02

Price: 6.90/7.94 (Including VAT at 20%)

Legion type Kepi x 8

Legion type Kepi x 8

Ref: SMAF03

Price: 6.90/7.94 (Including VAT at 20%)

Adrian helmet x 8

Adrian helmet x 8

Ref: SMAF04

Price: 6.90/7.94 (Including VAT at 20%)

Forage caps x 8

Forage caps x 8

Ref: SMAF05

Price: 6.90/7.94 (Including VAT at 20%)

Beret x 8

Beret x 8

Ref: SMAF06

Price: 6.90/7.94 (Including VAT at 20%)

Officers arms

Officers arms

Ref: SMAF07

Set of twelve, (may also be used for other ranks.)

Price: 8.40/9.66 (Including VAT at 20%)

Arms for advancing infantry

Arms for advancing infantry

Ref: SMAF08

3 pairs at the port, 3 pairs at the trail.

Price: 8.40/9.66 (Including VAT at 20%)

Firing Lebel 1888

Firing Lebel 1888

Ref: SMAF09

Price: 8.40/9.66 (Including VAT at 20%)

Holding rifles easy

Holding rifles easy

Ref: SMAF10

Easy x 4 pairs, walking sticks x 4 types.

Price: 8.40/9.66 (Including VAT at 20%)

Sleeved arms

Sleeved arms

Ref: SMAF11

12 assorted: carrying, holding, waving, writing, pointing, etc.

Price: 8.40/9.66 (Including VAT at 20%)

Scalelink | WW1 1:32 scale / Grande Guerre | French |  Heads and Arms

Buy now with PayPal