[sd.hide]-->
Product Sections
Main Pages
Best Sellers
Sun Helmets x 8
Set of eight heads.
find out more
Stiff Peak Cap x 8
Set of eight heads.
find out more
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.Markits DeLuxe Crankpin sets (8)
Soft Peak Cap x 8
Set of eight heads.
find out more
Romford 16.5mm Axle (1/8" diameter)
Markits DeLuxe Crankpin sets (6)
Back in stock
find out more
Hanazono 12 volt DC 5-pole motor
This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm
Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.14mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 14mm.THESE WHEELS ARE SOLD SINGLYRomford 16.5mm axle for OLDER Triang-Hornby chassis
This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.
Includes two brass fixing nuts