Etched de-insulating pick-ups for Scale Link Driving Wheels
£1.80/€2.07
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive. find out more
6 x Crank pins for driving wheels
£7.25/€8.34
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts. find out more
Romford 16.5mm Axle (1/8" diameter)
£1.98/€2.28
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.For spacing washers see WPY33 find out more
14mm Bogie wheels - 12-spoke
£4.68/€5.38
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 3 feet 6 inches in 00 121.8cm in H0 find out more
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0THESE WHEELS ARE SOLD SINGLY find out more
16mm /12-spoke driving wheel x 1
£4.20/€4.83
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010.Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0THESE WHEELS ARE SOLD SINGLY find out more
