Stop ends x 4 pairs, Swan necks x 2, Internal corner x 2, Hopper x 1, External corner x 4
(Pieces pour chenaux et descentes - ????) find out more
2mm (0.80") diameter plastic rod for SLC070B
£1.20/$1.50
NOTE: POSTAGE £7.50 + VAT as this is 36cm long unless cut. find out more
6 x Threaded crankpins & slotted retainers
£9.00/$11.25
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS find out more
6 x Crank pins for driving wheels
£7.20/$9.00
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.SEE EBAY LISTING = MAX 5 Packs per Customer.RESTRICTED TO 5 PACKS PER CUSTOMER. find out more
Etched de-insulating pick-ups for Scale Link Driving Wheels x 6
£9.00/$11.25
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.Fitting & Cutting instructions are included.Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives.. find out more
15mm/12-spoke Driving wheel x 1
£3.96/$4.95
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0THESE WHEELS ARE SOLD SINGLY find out more
20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1
£13.00/$16.25
This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle. find out more
Code 70 No 8 Turnout Left-hand
£21.60/$27.00
NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout. Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.
Customers outside the UK can only receive track by International standard parcel unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shippingRadius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degreesUse SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.Only 5 remaining -12/09/2022 find out more
