Product Sections

Main Pages

Best Sellers

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

3.00/3.45

3.7mm OD x 2mm deep x 1/8th bore.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.40/6.21

Back in stock...
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

The 'Potting Shed' set

The 'Potting Shed' set

6.48/7.45

18 pieces.

(Equipement de jardinier - Gartner - material)
find out more

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

3.60/4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm.

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY
find out more

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

40:1 Gearset 1/8

7.50/8.63

Original Romford Gearset

13.3mm wheel : 7.1mm worm.

Markits equivalent MGRS-401

Original Romford gears have shaft centre distance of 0.375" (9.53mm)
find out more

Ornate door canopies

Ornate door canopies

7.20/8.28

1 each of 3 types. ALSO SHOWN: Entrance pilasters x 6 (2 types) SLC030

Entrance steps x 3 SLC035 (Railings - See Brass Frets Section SLF010)

(Portiques, Pilastres, Marche - Baldachin, Pilaster, Treppe)
find out more

British Army Officers

Scalelink | WW1 1:32 scale / Grande Guerre | British |  British Army Officers

Infantry Officer marching

Infantry Officer marching

Ref: SMB07

Left foot forward

Price: 10.50/12.08 (Including VAT at 20%)

Highlander Officer marching

Highlander Officer marching

Ref: SMB07A

Left foot forward

Price: 10.50/12.08 (Including VAT at 20%)

Artillery/Cavalry Officer standing/riding boots

Artillery/Cavalry Officer standing/riding boots

Ref: SMB07B

Price: 10.50/12.08 (Including VAT at 20%)

Infantry Officer standing/puttees

Infantry Officer standing/puttees

Ref: SMB07C

Price: 10.50/12.08 (Including VAT at 20%)

Infantry Officer standing off duty

Infantry Officer standing off duty

Ref: SMB07D

Price: 10.50/12.08 (Including VAT at 20%)

Infantry Officer seated

Infantry Officer seated

Ref: SMB07E

Figure only - no seat.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: 10.50/12.08 (Including VAT at 20%)

Infantry Officer advancing

Infantry Officer advancing

Ref: SMB07F

Price: 10.50/12.08 (Including VAT at 20%)

Artillery/Cavalry Officer mounted - full kit

Artillery/Cavalry Officer mounted - full kit

Ref: SMB07H

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: 10.50/12.08 (Including VAT at 20%)

Scalelink | WW1 1:32 scale / Grande Guerre | British |  British Army Officers

Buy now with PayPal