Product Sections
Main Pages
Best Sellers
4 x Threaded crankpins & slotted retainers.
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS22mm/18-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0THESE WHEELS ARE SOLD SINGLY16mm Bogie wheels - 12-spoke
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H08 x Crank pins for driving wheels
Set of 8 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS14mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0THESE WHEELS ARE SOLD SINGLYRomford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,Romford 16.5mm axle with flat for grub screw (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.
For spacing washers see WPY33ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,MARKITS 12.5mm / 10-spoke BOGIE WHEELSET
METAL centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 12.5mm = 3 feet 2" in 00 = 1087cm in H0Markits DeLuxe Crankpin sets (8)
Markits Crankpin Bushes x 10
Ideal for bushing connecting rods etc
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
