Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle for OLDER Hornby chassis

Romford 16.5mm axle for OLDER Hornby chassis

1.08/1.51

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip.

Includes two brass fixing nuts
find out more

45ft Canal Holiday Cruiser

45ft Canal Holiday Cruiser

4.40/6.16

Solid Balsa wood cabin, narrow boat type hull. Length 7in approx.

Includes printed Balsa wood sheet, some pre-shaped wood parts and full building instructions. Pre-shaped wire parts where applicable. Hulls are solid Balsa wood. Paper colour panels for cabins, etc.

SELECT "CRAFTLINE KITS" FOR SHIPPING
find out more

Romford 16.5mm axle for OLDER Hornby chassis

Romford 16.5mm axle for OLDER Hornby chassis

1.08/1.51

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip.

Includes two brass fixing nuts
find out more

Romford DeLuxe Crankpin sets (6)

Romford DeLuxe Crankpin sets (6)

4.80/6.72


find out more

Romford 16.5mm Axle

Romford 16.5mm Axle

1.08/1.51

MRAX/OO

Includes two brass fixing nuts
find out more

Omen - Young man in shorts

Omen - Young man in shorts

4.00/5.60

This figure is painted for illustration only - the kit is NOT painted
find out more

Mashima mounting screws M1.4 x 2mm

Mashima mounting screws M1.4 x 2mm

0.60/0.84

Pack contains 2 x M1.4 x 2mm Mashima mounting screws.
find out more

40:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

40:1 Gearset 1/8

5.82/8.15

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20402

SEE ALSO SLGS13
find out more

Loco driver with sandwich

Loco driver with sandwich

3.00/4.20


find out more

Markits Return Crank Set

Markits Return Crank Set

8.10/11.34

A pair of Stainless Steel return cranks for Walschaerts vale gears.
find out more

`HO/OO' Shinohara Track & Pointwork Code 70

Scalelink |  `HO/OO' Shinohara Track & Pointwork Code 70

Code 70 Flexi-track - Nickel-silver

Code 70 Flexi-track - Nickel-silver

Ref: SDG315

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION


Price: 6.30/8.82 (Including VAT at 20%)

Code 70 Flexi-track - Nickel Silver x 10

Code 70 Flexi-track - Nickel Silver x 10

Ref: SDG315B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION


Price: 60.00/84.00 (Including VAT at 20%)

Code 70 Double-guard Flexi-track

Code 70 Double-guard Flexi-track

Ref: SDG317

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION


Price: 12.00/16.80 (Including VAT at 20%)

Code 70 No 4 Turnout Left-hand

Code 70 No 4 Turnout Left-hand

Ref: SDG301

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 No 4 Turnout Right-hand

Code 70 No 4 Turnout Right-hand

Ref: SDG302

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 No 6 Turnout Left-hand

Code 70 No 6 Turnout Left-hand

Ref: SDG303

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 No 6 Turnout Right-hand

Code 70 No 6 Turnout Right-hand

Ref: SDG304

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 No 8 Turnout Left-hand

Code 70 No 8 Turnout Left-hand

Ref: SDG305

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 18.00/25.20 (Including VAT at 20%)

Code 70 No 8 Turnout Right-hand

Code 70 No 8 Turnout Right-hand

Ref: SDG306

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 18.00/25.20 (Including VAT at 20%)

Code 70 No 4 Y-point

Code 70 No 4 Y-point

Ref: SDG307

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 No 6 3-way point

Code 70 No 6 3-way point

Ref: SDG308

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 66/87cm / 26/34" : Length 30.8cm / 12.12" : Left frog 9.30 degrees / Right frog 8.10 degrees£24.25 =

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 30.00/42.00 (Including VAT at 20%)

Code 70 No 6 Double crossover

Code 70 No 6 Double crossover

Ref: SDG312

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 49cm / 19.3" : Frog 9.30 degrees :

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 51.00/71.40 (Including VAT at 20%)

Code 70 No 6 Double slip

Code 70 No 6 Double slip

Ref: SDG314

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 45cm / 17.71"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 44.00/61.60 (Including VAT at 20%)

Code 70 No 6 Curved Left-hand

Code 70 No 6 Curved Left-hand

Ref: SDG326

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 25.20/35.28 (Including VAT at 20%)

Code 70 No 6 Curved Right-hand

Code 70 No 6 Curved Right-hand

Ref: SDG327

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 25.20/35.28 (Including VAT at 20%)

Code 70 Diamond crossing - 30 degree

Code 70 Diamond crossing - 30 degree

Ref: SDG330


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 Diamond crossing - 45 degree

Code 70 Diamond crossing - 45 degree

Ref: SDG331


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 Diamond crossing - 60 degree

Code 70 Diamond crossing - 60 degree

Ref: SDG332


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 Diamond crossing - 90 degree

Code 70 Diamond crossing - 90 degree

Ref: SDG333


Price: 15.00/21.00 (Including VAT at 20%)

Code 70 No 8 Curvable Turnout Left-hand

Code 70 No 8 Curvable Turnout Left-hand

Ref: SDG328

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 24.00/33.60 (Including VAT at 20%)

Code 70 No 8 Curvable Turnout Right-hand

Code 70 No 8 Curvable Turnout Right-hand

Ref: SDG329

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories


Price: 24.00/33.60 (Including VAT at 20%)

Scalelink |  `HO/OO' Shinohara Track & Pointwork Code 70

Buy now with PayPal