Romford Axle-nut screwdriver
Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts.
Romford DeLuxe Crankpin sets (6)
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
Couplings Screw link - assembled
Two pairs of couplings, ready assembled.
Plated steel pick-up wire - 4 feet
find out more
Markits 1/8th inch axle bush x 12
3.7mm OD x 2mm deep x 1/8th bore.
find out more
Couplings 3 link - assembled
4 pairs of couplings, ready assembled.
(Fenetres et Linteaux - Fensterrahmen und Sprossenwerk)Large bow-top windows = 32mm high x 16mm wide.Large flat-top windows = 32mm high x 16mm wide.Medium flat-top windows = 24mm high x 16mm wide.Small flat-top windows = 16mm high x 16mm wide.
Code 100 No 4 Double Crossover
NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout. Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.Customers outside the UK can only receive track by International standard parcel unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shippingLength 37cm/14.5" Frog 14 degrees. Radius is 405mm (16") - Track centres 50mm (£42.50 = $51.00 = 49. as at 30/03/17)Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.For manual operation see SDG651 in Shinohara accessories