Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£5.40/€6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.50/€8.63


find out more

1:35 German Crosses

1:35 German Crosses

£4.80/€5.52


find out more

1:35 German Markings

1:35 German Markings

£9.00/€10.35


find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£5.58/€6.42

Back in stock
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.62/€1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.20/€4.83

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£1.80/€2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.60/€4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm.

THESE WHEELS ARE SOLD SINGLY
find out more

GWR Finials x 8 <Signal Box>

GWR Finials x 8 <Signal Box>

£6.48/€7.45

38mm.

(Fleurons - ????)

POSTAGE £3.99 + VAT
find out more

0-scale MTH Coarse scale Passenger rolling stock

Scalelink | 0-scale MTH Coarse scale Passenger rolling stock

O-scale Stanier Open 3rd coach set LMS lake (Good as new).

O-scale Stanier Open 3rd coach set LMS lake (Good as new).

Ref: PO-050

Imported set from Europe - unsold dealer stock...ONE ONLY

For shipping select MTH Set of coaches or we cannot supply -

DO NOT SELECT SPECIAL DELIVERY - It is too large

NOTE: We can convert this set to 2-rail finescale wheels & screw couplings for £128.00

Conversion consists of 8 new MTH 2-rail fine-scale bogies, 8 x MTH screw couplings.

re-wiring 8 bogies for the interior lighting and a credit for the 3-rail bogies we remove.

Price: £525.00/€603.75

O-scale Stanier Open 3rd coach set 2-rail conversion

O-scale Stanier Open 3rd coach set 2-rail conversion

Ref: PO-050=CONV

Conversion consists of 8 new MTH 2-rail fine-scale bogies, 8 x MTH screw couplings.

re-wiring 8 bogies for the interior lighting and a credit for the 3-rail bogies we remove.

Price: £128.00/€147.20 (Including VAT at 20%)

O-scale Stanier bogie set 3-rail Coarse-scale

O-scale Stanier bogie set 3-rail Coarse-scale

Ref: SLMTH3

This pack contains 2 ready to run LMS 9-foot bogies and 2 bolsters with "coarse-scale" wheels.

Buck-eye couplers and pick-ups for coach lighting are already fitted.

The wheels are described by MTH as "Hi-rail" and have flanges 3mm deep.

The back to back is 27.2mm.

For shipping you must select "Small boxed kits or Special Delivery" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £27.00/€31.05 (Including VAT at 20%)

Scalelink | 0-scale MTH Coarse scale Passenger rolling stock

Buy now with PayPal