Etched de-insulating pick-ups for Scale Link Driving Wheels
£1.80/€2.07
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive. find out more
26mm/20-spoke Driving wheel x 1
£4.32/€4.97
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 26mm.THESE WHEELS ARE SOLD SINGLY find out more
6 x Crank pins for driving wheels
£5.40/€6.21
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts. find out more
19mm/16-spoke driving wheel x 1
£3.60/€4.14
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Diameter of drum is 19mm.THESE WHEELS ARE SOLD SINGLY find out more
Model built & photographed by Tony Little (Military Modelcraft)
A complete resin/whitemetal kit of this lengthened wireless van with wooden body.For shipping you must select "Small boxed kits or Special Delivery" or we cannot supply.International shipping = e-mail for shipping costs find out more
