Product Sections

Main Pages

Best Sellers

23mm/18-spoke Driving wheel x 1

23mm/18-spoke Driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 23mm. 5 feet 9 inches in 00 200cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£1.80/€2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Transfers to convert SLC137 to a police-car

Transfers to convert SLC137 to a police-car

£3.60/€4.14

(Marquages en version `Police' - Umdruck `Polizei')
find out more

Rover 12/14 Saloon 1937

Rover 12/14 Saloon 1937

£15.00/€17.25

(Shown as a Police Car)

(Berline - Limousine)

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/€8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

16mm Wagon/Coach/Tender wheels - 12-spoke

16mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/€5.59

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

Code 100 No 6 Curved Turnout - Left

Code 100 No 6 Curved Turnout - Left

£30.00/€34.50

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 7 remaining -05/03/2024

For manual operation see SDG651 in Shinohara accessories


find out more

25mm/18-spoke Driving wheel x 1

£4.80/€5.52

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: APRIL 2014

Diameter of drum is 25mm. 6 feet 3 inches in 00 217.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

The specified product reference (AAGWE07) couldn't be found.

Please wait for your browser to forward you to the next page or click here.